The Plane That's 38% Nose
Real Engineering
0:00 This is the X59, NASA's latest Xplane and the newest
0:03 creation from Loheed Martin's Secretive Skunk Works in Palmdale, California.
0:08 The same facility that produced the SR71, F-17 Nighthawk, P-38, F-35, and F-22.
0:14 This plane is designed to do one thing.
0:17 Make supersonic boom so quiet that a supersonic transport
0:21 could fly over a city and barely disturb a mouse.
0:24 With the insane experience in a house at Skunkworks,
0:28 this plane became a Frankenstein monster.
0:30 Pieced together with parts and lessons from F-16s,
0:33 T38s, and even an old F-17 Nighthawk, resulting in one of the most
0:38 aerodynamically interesting Xplanes in recent memory.
0:40 But can it really accomplish its mission?
0:44 This is the insane engineering of the X59 Quest.
0:51 The X59 is littered with interesting design choices,
0:53 but its key feature is right here.
0:56 This weird nose.
0:57 From tip to nose wheel, it takes up over half the plane.
1:00 The pilot can't even see out of the cockpit,
1:03 and the center of gravity is 3/4 down the plane
1:06 where the wings curve deep into the slim waisted fuse lo.
1:09 All these sharp twisting features are the result of a decade of aerospace
1:13 research on how to slice through the air in an entirely new way.
1:17 one that the X59 hopes will bring back supersonic flight.
1:20 Because ever since the Concord last flew,
1:23 commercial air travel has been subsonic and actually slowing down yearbyear.
1:27 Part of the reason for that, arguably the main reason,
1:31 is the lack of suitable routes for supersonic passenger planes.
1:35 The Conqueror flew only a few select flights over
1:38 the Atlantic where it sonic boom couldn't bother anyone.
1:41 If we can quieten the booms, more routes would open and drive money
1:44 into the development of supersonic passenger planes.
1:47 The X59's unique design choices are all in pursuit of this goal.
1:52 But let's start by explaining why it's
1:55 impossible to be both supersonic and silent.
1:57 This is a plane flying at 200 m/s, the speed of a regular airliner.
2:02 Like any object pushing through the air, it generates pressure waves.
2:06 They spread out in all directions at the speed of sound.
2:10 Most forces transmit this way.
2:11 You just don't notice the delay between pushing a table and seeing
2:15 it move because the speed of sound in a solid is so high.
2:19 Aircraft just fly fast enough that it starts to matter.
2:22 Now watch as the plane speeds up.
2:23 The pressure waves traveling ahead of it don't get
2:26 very far before the plane catches up with them,
2:28 causing them to stack up and increase in pressure.
2:31 And that's how a shock wave is born.
2:33 This causes a sudden disruption of the air flowing
2:36 over the plane and sharply increases the drag it experiences.
2:39 In fact, the drag coefficient of a regular airliner will double or triple
2:44 at this air speed with a corresponding increase
2:46 in the forces acting on its airframe too.
2:49 These were enough to tear apart the first aircraft traveling at these speeds.
2:53 And it was so difficult to get past them
2:56 that pilots coined the term sound barrier to describe it.
2:59 And it's even worse when not all parts
3:01 of the plane go supersonic at the same time.
3:03 Here's the profile of a regular wing.
3:05 Air flowing over the leading edge speeds up as it follows the curve.
3:09 That can push it past Mach 1,
3:11 even if the rest of the plane is slightly subsonic.
3:14 Air transitioning from subsonic to supersonic and back
3:17 to subsonic again doesn't follow the wing surface smoothly,
3:20 causing it to separate into turbulent flow that violently shakes the wing.
3:24 This is called MAC buffeting.
3:26 The aerodynamic center of the plane,
3:28 the average point where lift is generated, also shifts to the rear.
3:32 This effect, called Mac tuck, tends to pull the rear up,
3:35 causing the whole plane to pitch down.
3:37 If you're already in a dive, this deepens it,
3:40 something that affected the P38 and required the addition of a dive
3:44 flap to save pilots who found themselves in high-speed dives.
3:47 The X59, of course, is built to handle this.
3:50 It has delta wings that can
3:52 survive aerodynamic forces without much structural support.
3:55 They are highly swept,
3:56 effectively reducing the velocity of the air perpendicular to the leading edge.
4:01 In fact, the sweep angle is deliberately chosen to be steep enough
4:05 that the entire wing can hide inside the shock cone generated at the nose.
4:09 Inside the cone, the wings act as if they were in regular subsonic air flow,
4:14 avoiding the formation of shock waves over
4:16 their surfaces and becoming dramatically more efficient.
4:18 The wing profile is different, too.
4:21 Compared to a regular wing, it is very thin and symmetrical from top to bottom.
4:25 Air flowing over the wing doesn't accelerate as much,
4:28 so it's harder to form shock waves and separate into turbulent flow.
4:31 The shock waves above and below the wing are balanced,
4:34 too, reducing mock buffeting.
4:36 The downside to this profile is that it doesn't
4:39 produce lift unless it enters the air at an angle, unlike a regular wing.
4:43 But you can see that the X59's wings are installed with a natural angle already.
4:48 To maintain control,
4:49 the X59 uses all moving stabilators instead of elevants in the tail.
4:54 If the whole control surface tilts into the airflow,
4:57 there's nothing behind the turbulent wake.
4:59 So control is retained at supersonic speeds.
5:01 It adds a supersonic trim.
5:03 That is, it tilts the nose up to counter the rearward
5:07 shift in its center of lift caused by Mac Tuck.
5:10 Normally doing so adds drag, but the canards in the nose are angled in a way
5:14 to passively move the center of lift back to the front.
5:17 So, the amount of trim the X59 needs is cleverly reduced.
5:21 Now, the X59 accelerates past Mach 1.
5:24 It is going supersonic, outrunning its own pressure waves as they get
5:28 dragged behind it in a narrowing shock cone.
5:31 The X59's design speed is Mach 1.4,
5:34 which is 413 m/s in the cold air at 15 km altitude.
5:38 At this speed, its pressure waves are pressed into a 45° cone,
5:42 an unavoidable aspect of breaking the sound
5:45 barrier that makes it impossible to fly silently.
5:48 If you were standing on the ground with one of these planes speeding overhead,
5:52 you'd see it move past silently.
5:54 Then, after delay, you'd hear a distinct bang bang.
5:57 This double boom sweeps over the landscape,
5:59 and it can be strong enough to shake buildings or break windows.
6:03 The reason it's so powerful is because the shock waves
6:06 from a supersonic aircraft merge as they spread away from the aircraft,
6:10 adding up their energy until there's two peaks in an N-shaped wave.
6:14 This Nwave weakens as it travels down,
6:16 but enough energy is gathered in each peak
6:19 to produce a loud double boom at ground level.
6:22 Quest goal is not to eliminate supersonic booms,
6:25 but to alter them in a way that they
6:28 are no longer disruptive to the people on the ground.
6:30 There's two parts to it.
6:32 weakening the shock waves so they become quieter and then
6:35 shaping them so they don't become a powerful n-wave.
6:38 The first part relies heavily on the Witcom area rule
6:41 discovered by Richard Wickcom in 1952 while experimenting with wind tunnels.
6:46 It basically states that abrupt changes in the cross-sectional area of a plane
6:51 from nose to tail are what create the strongest shock waves.
6:55 A fuselage like a straight cylinder would have a constant cross-section until
6:58 the air flow reaches the wings which
7:01 suddenly adds a lot of cross-sectional area.
7:04 In the earliest supersonic planes,
7:05 this was the source of a very strong shock wave which resulted in immense drag.
7:10 If instead the fuse latch narrowed at the point where the wings were attached,
7:14 the change in cross-sectional area would be less
7:16 abrupt and the shock waves would be weakened.
7:18 Planes which follow the Wickcom area rule typically have
7:21 a coke bottle fuselage with a narrow waist and smooth curves.
7:25 Modern aircraft analyze every change in cross-sectional area to follow
7:30 the Wickcom rule from the cockpit bubble to the rudder placement.
7:34 But the X59 applies the area rule differently.
7:37 It is trying to generate the weakest shock waves by having
7:40 the smoothest transitions possible between its thick and thin sections.
7:43 That's why the nose is so long
7:45 and why the cockpit blends seamlessly with the fuselage.
7:48 And because of this, the pilot has to rely entirely on the cameras
7:52 and screens of its external vision system to fly the plane.
7:55 At the point where the wings are the widest, the fuselage is also the narrowest.
8:00 The engine looks like it sticks out,
8:02 but the airflow sees it as a hollow tube rather than an obstacle,
8:06 so it doesn't actually change the cross-sectional
8:08 area as much as you would expect.
8:10 In the rear, the tail is short with the rudder
8:13 bridging the gap between the wings and the stabilators.
8:15 Thanks to these features, the only strong shock waves that are generated
8:19 are near the canards and the engine intake.
8:22 The intake has a special bump called a divertless
8:25 supersonic inlet that solves two problems with high-speed flight.
8:28 You can see these on the most advanced fighter jet, the F-35.
8:32 As air travels along the length of the body,
8:35 air begins to form a layer of slowmoving turbulent air called a boundary layer.
8:39 If this air is allowed to enter the engine,
8:42 it not only lowers performance, it can also damage the engine.
8:45 As the turbine rotates, it will pass through the slow boundary air on one
8:49 side and then the fast free stream air on the other.
8:52 This means the force on the turbine blade changes for each and every rotation,
8:57 causing cyclical bending, a recipe for fatigue failure.
9:01 Planes like the F-16 feature a boundary layer diverter
9:05 that separates the inlet from the fuselage with a small gap,
9:09 but this design increases drag.
9:11 Later variants of the F-16 tested the DSI, a divertless supersonic inlet,
9:16 essentially a large bump that creates a region of compression
9:20 that pushes the boundary layer away from the inlet while lowering drag.
9:24 The test flight demonstrated it could meet performance requirements,
9:27 ushering in its introduction to the F-35.
9:31 The final product reduces weight by 30%
9:34 and lowers production and maintenance costs.
9:36 The X59 takes it to the next level by moving it onto its back,
9:41 so the shock wave it produces is directed up and away from the ground.
9:45 The next step in Quest design is to shape the sonic boom.
9:48 If the main wings did all of the lifting,
9:51 there'd be a single strong shock wave centered on them.
9:54 With the canards, large stabils, and little fins on the rudder,
9:57 the sources of lift are distributed along the plane's length,
10:01 resulting in multiple smaller shock waves precisely spaced out from each other.
10:05 The X59's unconventional layout helps it move all of these shock waves far
10:10 enough apart that they don't merge as they travel down to the ground.
10:14 Instead of adding up into a single N-wave,
10:16 they stay separate and weak all the way
10:18 to the ground where they're heard as a longer,
10:21 softer thump rather than a short boom.
10:23 The objective here is to reduce the volume of a sonic boom down to 75 dB.
10:29 That's like a door slamming shut across the street
10:32 or a small truck passing you on the highway.
10:34 To get to this point, the X59 was put through a rigorous
10:38 regime of computer simulations and wind tunnel tests.
10:41 Every bump and curve was mapped out and its effects on the air
10:45 flow calculated by the advanced supercomputing
10:47 division at the AS research center.
10:50 Scale models of the X59 were placed into wind tunnels at NASA's Langley,
10:54 Loheed Skunk Works, and even Jax's test facility in Tokyo.
10:58 All of this makes the X59 a unique design,
11:01 but it's not the first plane to try to shape its own sonic booms.
11:05 The most recent is this NASA F-15B that collaborated
11:09 with Gulfream Aerospace on the quiet spike project.
11:12 A multi-stage 7.3 m extendable spike was installed on its nose,
11:17 adding 38% to the jet's length that helped split the shock
11:21 cone at the front of the plane into three smaller shock waves.
11:25 Before that, the same F-15B tail number 836 was used
11:28 to trial an ugly duckling F5E fitted with the much
11:32 longer nose and modified fuselage to measure whether it
11:35 could reduce the intensity of its sonic boom in flight.
11:38 It did so by one/3.
11:40 The X59 program is the most serious attempt
11:42 at designing a plane purpose-built for reducing sonic booms.
11:46 Loheed Martin Skunk Works got a quarter
11:48 of a billion dollar contract to build it.
11:51 Parts from existing planes were used wherever
11:53 possible to save time and reduce costs,
11:55 which is why it got the landing gear of a Falcon,
11:58 the engine of a Hornet, the cockpit canopy of a T38 Talon,
12:02 the control stick of a Nighthawk, and even components from a U2 spy plane.
12:06 After 5 years in the workshop, the X59 rolled out in 2023.
12:11 The X59 was unveiled to the public on the 12th of January 2024,
12:16 but its first cautious flight only happened on October 2025.
12:19 In 2026, it is still being put through its paces.
12:23 It reached an altitude of 6 km in April,
12:26 then went supersonic for the first time in June 2026.
12:30 A week later, it reached its design speed of Mach 1.4 at an altitude of 15 km.
12:36 The next step is to fly over Edward's
12:38 Air Force Base while surrounded by sensors and microphones,
12:42 both on the ground and flying alongside it at all altitudes
12:46 to demonstrate that the low boom concept will work in the real world.
12:50 Wind tunnel testing doesn't say what weather, winds, clouds,
12:53 and terrain due to the impact of sonic booms on the ground.
12:56 So, the data can only be gathered live.
12:59 Then the big test.
13:00 The X59 will be flown over several US cities
13:04 to measure how residents will react to its sonic booms.
13:07 This community response testing is the most important step in changing flight
13:12 regulations from a straightup supersonic ban
13:13 to a 5.3 Pascal ground pressure restriction.
13:16 If it succeeds, the door may open
13:19 to a new generation of supersonic passenger flight.
13:22 But a quieter supersonic boom doesn't solve all the problems.
13:26 Technology may have progressed,
13:27 but it's arguably more difficult economically to pull off today,
13:31 mostly on fuel costs.
13:32 Supersonic jets need smaller fuselages to cut down on drag
13:36 and thus can spread the cost of fuel across as many passengers.
13:40 With fuel costs higher than ever,
13:42 the next big challenge is getting fuel demands lower.
13:45 But that's no easy task.
13:46 The engineers of the X59 chose to use a reliable off-the-shelf military engine,
13:52 the General Electric F414, the same engine the Super Hornet uses.
13:56 This was primarily a cost of development choice,
13:59 but these engines will just not cut it for a commercial application.
14:03 The Concord was excellent in Super Cruise.
14:06 Its four Olympus engines turned out to be
14:09 the most thermodynamically efficient motors of their time,
14:11 thanks to a complex arrangement of intake
14:14 ramps that could compress the incoming air,
14:16 slowing it down while recovering its kinetic
14:19 energy as pressure rather than wasting it.
14:21 That way, it could super cruise at Mach 2,
14:24 but getting up to super cruise required costly afterurners.
14:27 The Soviets actually beat the Concord into service with the Tupalev Tu44.
14:33 It was heavier, faster with 42% more powerful
14:36 engines and canards to help it lift off.
14:39 But its tragically unlucky career was terminated after 3 years.
14:43 The X59 inherits features from both.
14:45 Its delta wings are actually double deltas similar to the Concord
14:49 with the inner portion at 76° and the outer portion at 68.6°.
14:54 Its canards also help by generating vortices that spill
14:57 over onto the main wing at low speed.
15:00 The next piece of the puzzle is creating an engine
15:03 that can run efficiently at both subsonic and supersonic speeds.
15:07 Astromechanic is designing and testing hybrid engines
15:10 with an electric fan mode at low speed,
15:13 an efficient turbo fan mode for transonic to supersonic flight,
15:16 and a ramjet mode to keep it pushing up to Mach 3.
15:19 A design this advanced is only made possible
15:21 by recent progress in high powertoweight ratio electric motors,
15:25 dense batteries, and heatresistant ceramic turbine blades.
15:28 And just a little side note, my other company,
15:32 Throttle, actually created these animations for Astrome Mechanica.
15:35 If you run an engineering company and need help making animations,
15:38 we can help you out.
15:40 With engines like these, a supersonic plane could enter
15:43 a virtuous cycle of needing less fuel to make a trip,
15:45 which means smaller wings to take off,
15:47 which leads to less drag and smaller engines,
15:50 which in turn reduce the fuel needed further,
15:52 which would also potentially open up
15:55 options for longer range trans-pacific routes,
15:57 which could prove extremely valuable.
15:59 But it's not a done deal.
16:01 Private companies have attempted to bring back
16:03 supersonic flight since the Concord ended in 2003.
16:07 The Aryan Corporation spent between500 million
16:09 and a billion dollars on its AS2 design, a sort of supersonic business jet,
16:14 but failed after declaring the effort would take closer to $10 billion.
16:19 Exos, Virgin Galactic, and Spike Aerospace have all tried and failed.
16:23 Boom Aerospace is the current contender.
16:25 They plan to deliver an 80 seat supersonic jet called the Overture,
16:30 which would super cruise at Mach 1.7.
16:32 It has raised about $600 million to do it and has been working on it
16:36 for the past decade when it isn't busy
16:39 designing gas turbines to power AI data centers.
16:41 That is instead of a painstakingly designed airframe
16:44 with a shaped sonic boom like the X59, they're relying on Mac cutoff,
16:49 a phenomenon where sonic booms don't reach the ground if they start
16:53 out between Mach 1.1 and Mach 1.3 at around 10 km altitude.
16:57 A phenomenon they have tested once and claimed success.
17:01 Simply put, sonic booms are sound waves
17:03 that refract when traveling through air of different densities,
17:06 and they can bend enough to make a U-turn
17:09 in the air and never reach the ground under specific weather conditions.
17:13 This means Boom Aerospace would be constantly adjusting its speed, altitude,
17:17 and flight path while navigating through the atmosphere,
17:20 looking for those perfect conditions.
17:22 There's still no guarantee that Boom
17:25 Aerospace or some other company will succeed.
17:28 Supersonic jets will always be more
17:30 expensive than subsonic airliners just because
17:32 they take more fuel and make more sacrifices to carry each passenger.
17:36 Rising fuel costs and businesses relying on video calls rather than
17:40 physical meetings in other countries are also making them less likely.
17:43 But there are a lot of people who will
17:46 pay thousands of dollars to save themselves a few hours.
17:49 And with 5,500 new millionaires being printed every single day around the world,
17:55 finding a market for these faster planes might not be so difficult.
17:59 Just to demonstrate how far technology has come
18:02 since the Concord made its first flight in 1969,
18:05 this was how big state-of-the-art calculators were at the time.
18:09 This is the AL-1000 Commodore, manufactured by Casio in Japan in 1968.
18:14 It's a beautiful piece of computer history.
18:17 It has just 448 bits of memory from its
18:20 core memory array which stores data on tiny iron rings.
18:23 And these high voltage Nixie tubes demanded a fairly complex power supply.
18:28 I bought this as part of a Nebula series
18:31 where I put cool objects like the Nokia 3310
18:34 and the first generation iPod into a CT scanner
18:37 and then used the Volutric models to make messmerizing animations.
18:41 Well, this calculator is both too big and too
18:44 heavy to fit in the CT scanners we are using.
18:48 So, uh I I messed up there.
18:50 But it did kickstart a new obsession for me.
18:53 Uh the history of old calculators.
18:55 So, instead, the first episode is about the Curta mechanical calculator,
18:59 which is an absolutely fascinating little portable calculator
19:02 that uses gears and rotating levers for calculations.
19:05 You can watch that episode when it releases on Nebula next month.
19:09 With the help of Nebula,
19:10 we hired a new animator with a background in electronic engineering to take
19:14 the animation technique we developed to make one of these episodes a month.
19:18 Next month, we'll be going further down
19:20 this new calculator collecting hobby with the Sharp E8,
19:23 which launched just 4 years after this gigantic thing
19:27 and benefited from the new arms race in microchip development.
19:31 So, subscribe to Nebula if you want to watch
19:34 me obsess over old calculators for the next few months.
19:37 A monthly subscription to Nebula is usually $6.
19:39 But with my link or the QR code on screen right now,
19:42 you can get an entire year's membership for just $30.
19:46 Or if you're sick of signing up to new subscription services like I am,
19:50 we've created a lifetime membership if you'd rather just pay it and forget it.
19:54 With YouTube policies changing more and more in favor of slop scrolling,
19:58 every subscriber over Nebula counts where we can
20:01 focus on the things that really get us excited.