Recursive racks

Recursive racks

Henry Segerman

0:01 Here's an unusual expanding mechanism made from rack and pinion gears.

0:06 Let me break down how it works.

0:08 It starts with this little box with a gear wheel on it.

0:14 There are holes in the sides of the box and you can put a rack through one

0:19 of the holes and it meshes with the gear

0:23 so that they form a rack and pinion mechanism.

0:28 If you put another rack through the box in the other direction as well,

0:35 then both racks mesh with the same pinion gear and when we move one rack,

0:41 the other moves as well.

0:46 Okay, fine.

0:48 Next, let's attach a box to this rack.

0:51 And a rack to this box.

0:55 and add another rack going through the new box.

0:58 Okay, so here we go.

0:59 The box now has a rack attached to it.

1:02 This rack now has a box.

1:04 And another rack going through it.

1:06 Now, what's going to happen when I move this rack through this box?

1:13 Well, when I push this rack in, what it's going

1:16 to do is it's going to pull this rack this way.

1:19 That's going to move the two boxes together,

1:23 which will also push this rack through this box,

1:27 which will then make this rack go this direction through the box.

1:32 Let's see what happens.

1:44 So this is sort of "spooky action at a distance".

1:48 I do something over here and it makes something happen over here,

1:53 quite far away from where I'm working the mechanism.

1:58 Well, you know what we need to do next.

2:00 Chain a whole bunch of these together.

2:03 Alright, here's a chain of seven boxes and racks,

2:10 and we get this expanding mechanism.

2:17 If you ignore the racks and just look at the boxes,

2:21 they move apart and together,

2:23 like you're scaling an object in a vector graphics program.

2:28 As you go along the chain, the racks and boxes change height,

2:33 so they are higher on this side and then they go down lower and lower and lower.

2:38 And you need this so that the racks don't collide with each other.

2:41 Like this one needs to go underneath this one.

2:45 I call these "recursive racks" because the way

2:49 the mechanism works is like a recursive function.

2:51 The position of each of the parts in the chain

2:54 is determined by the positions of the previous two parts.

2:58 So for example, here's this gray box,

3:00 and it's got this gray rack here and this gray rack here.

3:03 So that's one of the parts.

3:05 And here's this green box with a rack coming out of it,

3:12 and its rack is meshing over here with this gear on the gray part,

3:18 which is then meshing with this green part over here.

3:21 so the recursion is that if you know where this gray

3:24 part is and you know where this green part is,

3:27 then you know where this green part is.

3:29 It's determined by the position of these things here.

3:32 And then that continues this part and this part determine where this part is,

3:39 and then this part and this part determine where this gray part is here.

3:45 So the action is happening in this box,

3:48 this gray rack here and this gray rack here

3:52 are sort of gearing together inside of this box.

3:54 So, again, if you know where this box is

3:56 and its rack and you know where this box is,

3:59 then that tells you where this one is.

4:01 And that continues along the chain.

4:08 Our geared cube is also a recursive mechanism.

4:12 It's the same sort of thing.

4:14 Once you know where this part and this part are,

4:18 then that determines where this part is.

4:21 So these three parts here interact.

4:24 This is sort of a gearbox.

4:26 And then this part here is the same as this gear.

4:29 And this part here is the same as this gear.

4:31 So these two gears mesh into each other in the gearbox formed by this one.

4:37 And so, again, knowing where this one

4:39 and this one is tells you where this one is.

4:41 And then knowing where this one and this one is tells you where this one is.

4:44 And so on down the chain.

4:47 And we were inspired to make both

4:48 of these mechanisms by Oskar van Deventer's "Tailspin mechanism",

4:52 which I would also call a recursive mechanism.

4:55 Again, the position of each part is determined

4:59 by the position of the previous two parts.

5:04 You could say that the recursive racks are not quite the same

5:08 as these other two mechanisms because there are extra rigid parts,

5:13 these little wheels,

5:15 these little gear wheels are extra moving parts that are not part

5:19 of the sort of recursive mechanism that we've seen in the other two.

5:24 Well, the gear wheels are not strictly necessary.

5:26 The important thing is that a box holds two racks

5:31 together so that when one rack moves, so does the other.

5:35 Here's a way to have that happen without the extra little gear wheel.

5:39 If I hold this part still, say,

5:43 then moving one of the other parts moves the third.

5:48 The only problem with doing this kind of thing to make recursive

5:52 racks is that there's a lot of friction with these diagonal gear teeth.

5:56 And the little gear wheels here transfer force much better,

6:01 which matters when you're trying to chain a bunch of these together.

6:05 Here's another mechanism that looks very similar

6:08 to the expanding-contracting mechanism we've been looking at so far,

6:13 but it does something completely different.

6:16 Well, so first of all, spot the difference.

6:18 What is actually the difference between

6:20 this new mechanism and the old mechanism?

6:23 And I'll give you a hint.

6:24 It's to do with where the little gear wheels are.

6:26 So on this new one, the gear wheels are all

6:28 sort of pointing in towards the middle of the chain,

6:32 whereas here they're sort of pointing backwards along

6:35 the chain or pointing forwards along the chain.

6:37 And there's also a couple of differences

6:39 in the racks just to mesh with the gear teeth.

6:42 So for example, this rack here is pointing this way, so it meets the gear here.

6:48 Whereas on this one it pointed that way to meet the gear here.

6:53 So, okay, before I show you what it does, what do you think?

7:00 In this first mechanism, when we pull two boxes apart,

7:07 the next pair of boxes also move apart.

7:10 But here in this new mechanism, it does the opposite.

7:15 When I pull these two apart, these two come together,

7:20 and then the two after them come apart,

7:23 and then the two after those come together and so on.

7:26 So what it does is this.

7:33 So as I say, when this rack- pair of racks

7:39 get longer or the distance between these boxes gets longer,

7:41 the distance between these two get shorter, longer, shorter, longer.

7:45 And because they're alternating going one way and the other way,

7:48 sort of 90 degrees, maybe we can turn it this way.

7:51 And then you've got the vertical racks and the horizontal racks.

7:56 And what's happening is that the distance between the boxes is sort

7:59 of switching between being on the vertical

8:01 racks and being on the horizontal racks.

8:06 So what happens is that these boxes move diagonally.

8:14 It's easier if I grab these two boxes in the middle.

8:19 You see, all the boxes here are moving

8:21 diagonally relative to the vertical and horizontal axes.

8:27 And if you try and work it by holding the boxes at either end of the chain,

8:31 then you have to do this sort of twisting movement to get them to go.

8:41 Finally, here are a couple of recursive

8:43 mechanisms that mix racks with spur gears, as in Oskar's Tailspin mechanism.

8:52 So in all of the previous recursive racks mechanisms that we've

8:57 looked at, each of the parts consisted of a box

9:00 and then two racks and then racks from the neighboring

9:03 parts in the chain interact inside of the box.

9:05 Here I've got a box,

9:07 this gray box here I've got one rack coming out this direction.

9:11 But also rigidly attached to this box is a spur gear.

9:16 And this green box here has a spur gear rigidly attached to it here,

9:22 and then a rack coming out this way.

9:25 And so what that means is you're going along with the recursive racks chain.

9:32 When I pull or push this rack through here,

9:36 it increases or decreases the distance between these and this rack here,

9:40 rather than causing another rack to move,

9:43 it causes this gear to move and then otherwise it continues

9:47 in the same way as it did for the recursive racks.

9:52 So as I say, it's a mix between the recursive racks and Oskar's Tailspin.

9:56 So that's this one.

9:58 What about this one?

9:59 What does this do?

10:00 So this one's a little bit more complicated still.

10:04 It's got a couple of these in a chain.

10:10 And notice what's happening is this pair of racks and this pair

10:14 of racks are always parallel to each other as we move the mechanism.

10:20 But at the same time,

10:21 we've got a long distance between these two boxes and then short

10:25 and then long and when we work the mechanism- go all the way around.

10:34 Now they've swapped around.

10:35 Now it's short, long, short.

10:36 So it's the same sort of idea of transferring force along the mechanism.

10:42 This one is a little bit more like the diagonal

10:46 moving boxes mechanism because it's switched across between short and long.

10:53 Whereas this one here is a little bit more like the original expanding

10:58 one because these are both short racks here and they're both long here.

11:05 So again, you can sort of play around with where the gears are,

11:09 on which side of the gear wheels the racks

11:12 are on, and so on to get different effects.

11:16 Alright, these are recursive racks.

11:18 Thanks for watching.

Study with Looplines Download Captions Watch on YouTube